Tuesday, September 26, 2023

Not Able to Join WiFi Network of Wavlink Extender? Let’s Fix It!

Is your Wavlink extender giving you a hard time connecting to your WiFi network after the Wavlink WiFi extender setup? Don’t worry this issue can occur due to some possible reasons. But it’s usually easy to fix. In this post, we’ll break down the steps to help you get your Wavlink extender connected to your WiFi network simply and easily. Keep reading to find out more!

Well, before we tell you about troubleshooting tips we would like to introduce you to the reasons first because this will make the things easy for you to remove the issue from its roots easily.

Reasons: Can’t Join Wavlink Extender WiFi Network

Here we are going to discuss some common reasons with you so that you can understand the situation and will fix it in no time.

Poor Internet Connection

Most of the users face can’t join WiFi of Wavlink extender issue due to poor internet connection because to access the WiFi the network should be strong.

Improper Electricity

The next most possible reason is insufficient power supply from the socket. Maybe you plug your device into the damaged wall outlet which does not supply the proper power to the extender.

Wireless Interference

WiFi interference in networking devices is common nowadays. It occurs when a device is placed near an electronic device and metal objects.

Outdated Firmware

Firmware is software that plays a crucial role in the networking device. But when it runs into its outdated version it causes network issues. So, there is a chance that your device operates the outdated versions.

Excessive Distance

The long-distance between the extender and router is also causing the WiFi issues. Because of long-distance devices not able to communicate with each other.

Broken Ethernet Cable

If you make the wired connection between the extender and router, then there is a chance that the cable you use for the connection is broken or damaged.

Thus, these are the reasons why you are not able to access the WiFi of the Wavlink extender. You can fix this issue on your own. You just need appropriate guidance. To get the solutions you have to read the next section in which we explain it.

Solutions: Can’t Join WiFi Network of Wavlink

1. Minimize Interference

  • Keep your extender away from devices that emit electromagnetic interference.
  • Place the extender in a central location away from walls and obstacles.

2. Check Range and Placement

  • Make sure you’re within a reasonable range of the extender for optimal 5GHz signal strength.
  • Experiment with different placements to find the best spot for the extender.

3. Update Firmware

  • Log in to the Wavlink extender’s web interface.
  • Check for firmware updates and install them if available.
  • Follow the manufacturer’s instructions to update the firmware properly.

4. Verify Device Compatibility

  • Check the specifications of your devices to ensure they support the 5GHz frequency.
  • If not, consider using the 2.4GHz network or upgrading your devices if possible.

5. Manage Channel Congestion

  • Log in to the extender’s web interface and navigate to the wireless settings.
  • Change the 5GHz channel to a less crowded one to avoid interference.

6. Reset Wavlink Extender

If none of the above hacks helps you to fix the issue, then reset your device to its factory settings. By doing this you will erase all the customized settings of your device. You can reset your device by following the following points:

  • Ensure that the extender is powered on.
  • Now locate the reset button on the extender.
  • The reset button is usually located on the back side of the device.
  • Once you find the reset button, press it by using a pin.
  • Hold it for some seconds until the device is reset properly.

Once the device is reset your device reboots automatically. After that, you need to reconfigure it by accessing the ap.setup page. Or if you have a Wavlink router then you need to access the Wavlink router login page.

Thus, these are the solutions that you can use to fix can’t to join the WiFi network of the Wavlink extender. Once the issue is resolved you will able to connect to the extender WiFi.

Marc Berman
Marc Berman
Marc Berman is the founder and Editor-in-Chief for Programming Insider, the online destination for network, cable, digital and syndication. Berman has written for a wide range of publications, including Forbes, CBS Watch, Next TV, PromaxBDA, Newspro, Campaign US, The New York Daily News, The Hollywood Reporter, Variety, Emmy Magazine, and C21 International. He has also appeared on “Entertainment Tonight,” “Extra,” “Access Hollywood,” “Inside Edition,” “The CBS Evening News,” E!, CNN, CNBC, Fox News and MSNBC.

Related Articles

Latest Articles