In this modern era, to stay connected with high-speed internet is very important. So, to fulfill this need many people use the TP-Link AC750 repeater. With the help of this users not only get the internet but even extend the wireless network coverage throughout the house. But, like other electronic devices, it also has problems that users face in their daily life. Recently users face issues like extender not working, device not connecting to the internet, the extender going offline, and many more. These kinds of issues can be solved by implementing the reset process. If you don’t know how to reset TP-Link extender, then worry not. In this post, we’ll walk you through two easy methods to reset your TP-Link AC750 repeater and get your network back up and running smoothly. Keep reading!
Note: Resetting your repeater will erase any custom settings, so be sure to keep a record of your configurations if needed.
Method 1: Soft Reset
In this method, all you have to do is access the TP link AC750 setup page by using the default web address. Plus, you also need the important things that you require during the process. These requirements are a computer, strong internet connection, default username & password, and updated internet browser. Once you have all the things at hand you can perform the further-mentioned steps:
Step 1: Power On the Device
- Make sure your device getting the proper power supply from the wall outlet.
- Press the power button to turn on the device.
- Don’t proceed until the device is properly stabilized.
Step 2: Switch on Computer
- Now plug the computer into the socket.
- Press the start button.
- Connect the computer to the extender’s network.
Step 3: Open Internet Browser
- After connecting to the extender network, open the internet browser.
- Make sure you use the updated browser.
- You can use any popular browser for the process.
Step 4: Access the Web URL
- Insert the default web address into the address bar of the browser.
- Press the Enter key to access the login page.
- Now you need to insert the login details.
- Click on the login button.
Step 5: Reset Extender
- After logging into the extender, look for the system or tool option.
- Select the Reset.
- Click on it and wait until the process begins.
Once the repeater has restarted, you’ll need to set it up again.
That’s it in this way you can reset your device by accessing the TP link AC750 setup page. Now let’s move to the next section to learn about the hard reset which is one of the easiest methods to set the TP-link extender to its factory settings.
Method 2: Hard Reset
Here are the steps of the hard reset method that you must know. This method is preferred by most users because in this process all you have to do is reset the device by pressing the reset button.
Step 1: Locate the Reset Hole
The hard reset method involves resetting your TP-Link AC750 Repeater to its factory default settings. Start by finding the reset hole on the repeater. This small hole is usually labeled “Reset” and might require a pin or paperclip to access.
Step 2: Insert and Hold
Gently insert a pin or paperclip into the reset hole and press and hold the button inside for about 10-15 seconds. As before, the LED lights may start blinking during this time.
Step 3: Release and Wait
After holding the button for the required time, release it. The repeater will go through a reset process. Allow it a moment to complete this process.
Step 4: Reconfiguration
Just like with the soft reset method, you’ll need to set up the repeater again. Connect to its default WiFi network and access its setup page using a browser. Follow the provided instructions to reconnect it to your existing WiFi network.
Conclusion
Now you know about both the methods hard reset and soft reset. You can use any of them according to your convenience. Once the device is reset all the settings of the device are erased and you will get your device new.
